C613-50100-01 REV C Command Reference for x930 Series 2486
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VRRP COMMANDS
SHOW
RUNNING-CONFIG ROUTER IPV6 VRRP
show running-config router ipv6 vrrp
Overview Use this command to show the running configuration for VRRPv3 IPv6.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
See the VRRP Feature Overview and Configuration Guide for more information
about VRRPv3 IPv6 configuration details.
Syntax
show running-config router vrrp
Mode Privileged Exec, Global Configuration, Line Configuration, and Interface
Configuration.
Example The example below shows you how to display the running configuration for
VRRPv3 IPv6:
awplus# show running-config router ipv6 vrrp
Output Figure 52-1: Example output from the show running-config router ipv6 vrrp
command
!
router ipv6 vrrp 3 vlan3
virtual-ip fe80::202:b3ff:fed5:983e master
circuit-failover vlan3 3
advertisement-interval 6
preempt-mode false
!
To Next Page
Loading...
Need help?
General
