C613-50100-01 REV C Command Reference for x930 Series 139
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
FILE AND CONFIGURATION MANAGEMENT COMMANDS
EDIT
(FILENAME)
edit (filename)
Overview This command opens a remote text file as read-only in the AlliedWare Plus™ text
editor.
Before starting the editor make sure your terminal, terminal emulation program, or
Telnet client is 100% compatible with a VT100 terminal. The editor uses VT100
control sequences to display text on the terminal.
Syntax
edit <filename>
Mode Privileged Exec
Example To view the file bob.key stored in the security directory of a TFTP server, use the
command:
awplus# edit tftp://security/bob.key
Related
Commands
copy (filename)
edit
show file
Parameter Description
<filename> The filename and path of the remote file. See Introduction on
page 114 for valid syntax.
To Next Page
Loading...
Need help?
General
