C613-50100-01 REV C Command Reference for x930 Series 455
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SWITCHING COMMANDS
DEBUG
LOOPPROT
debug loopprot
Overview This command enables Loop Protection debugging.
The no variant of this command disables Loop Protection debugging.
Syntax
debug loopprot {info|msg|pkt|state|nsm|all}
no debug loopprot {info|msg|pkt|state|nsm|all}
Mode Privileged Exec and Global Configuration
Example To enable debug for all state transitions, use the command:
awplus# debug loopprot state
Related
Commands
show debugging loopprot
undebug loopprot
Parameter Description
info General Loop Protection information.
msg Received and transmitted Loop Detection Frames (LDFs).
pkt Echo raw ASCII display of received and transmitted LDF packets to
the console.
state Loop Protection states transitions.
nsm Network Service Module information.
all All debugging information.
To Next Page
Loading...
Need help?
General
