63
C613-50100-01 REV C Command Reference for x930 Series 2999
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Trigger Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
Triggers. For more information, see the Triggers Feature Overview and
Configuration Guide.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Command List •“active (trigger)” on page 3001
•“day” on page 3002
•“debug trigger” on page 3004
•“description (trigger)” on page 3005
•“repeat” on page 3006
•“script” on page 3007
•“show debugging trigger” on page 3009
•“show running-config trigger” on page 3010
•“show trigger” on page 3011
•“test” on page 3016
•“time (trigger)” on page 3017
•“trap” on page 3019
•“trigger” on page 3020
•“trigger activate” on page 3021
•“type atmf node” on page 3022
•“type cpu” on page 3025
•“type interface” on page 3026
•“type memory” on page 3027
To Next Page
Loading...
Need help?
General
