C613-50100-01 REV C Command Reference for x930 Series 1033
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OSPF COMMANDS
SHOW
IP OSPF DATABASE OPAQUE-AREA
show ip ospf database opaque-area
Overview Use this command to display information about the area-local (link state type 10)
scope LSAs. Type-10 Opaque LSAs are not flooded beyond the borders of their
associated area.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip ospf database opaque-area [<ip-address>]
[self-originate|<advrouter>]
Mode User Exec and Privileged Exec
Examples
awplus# show ip ospf database opaque-area 1.2.3.4
self-originate
awplus# show ip ospf database opaque-area self-originate
awplus# show ip ospf database opaque-area 1.2.3.4 adv-router
2.3.4.5
Output Figure 26-10: Example output from the show ip ospf database opaque-area
command
Parameter Description
<advrouter> adv-router <ip-address>
adv-router Displays all the LSAs of the specified router.
<ip-address> A link state ID, as an IP address.
self-originate Displays self-originated link states.
OSPF Router process 100 with ID (10.10.11.50)
Area-Local Opaque-LSA (Area 0.0.0.0)
LS age: 262
Options: 0x2 (*|-|-|-|-|-|E|-)
LS Type: Area-Local Opaque-LSA
Link State ID: 10.0.25.176 (Area-Local Opaque-Type/ID)
Opaque Type: 10
Opaque ID: 6576
Advertising Router: 10.10.11.50
LS Seq Number: 80000001
Checksum: 0xb413
Length: 26
To Next Page
Loading...
Need help?
General
