C613-50100-01 REV C Command Reference for x930 Series 1378
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
SHOW
BGP IPV6 LONGER-PREFIXES (BGP4+ ONLY)
show bgp ipv6 longer-prefixes (BGP4+ only)
Overview Use this command to display the route of the local BGP4+ routing table for a
specific prefix with a specific mask or for any prefix having a longer mask than the
one specified.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show bgp ipv6 <ipv6-addr/prefix-length> longer-prefixes
Mode User Exec and Privileged Exec
Example
awplus# show bgp ipv6 2001:0db8::/64 longer-prefixes
Related
Commands
show bgp ipv6 (BGP4+ only)
Parameter Description
<ipv6-addr/
prefix-length>
Specifies the IPv6 address with prefix length. The IPv6
address uses the format X:X::X:X/Prefix-Length. The
prefix-length is usually set between 0 and 64.
To Next Page
Loading...
Need help?
General
