C613-50100-01 REV C Command Reference for x930 Series 2801
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DHCP FOR IPV6 (DHCPV6) COMMANDS
SHOW
IPV6 DHCP POOL
show ipv6 dhcp pool
Overview Use this command in User Exec or Privileged Exec mode to display the
configuration details and system usage of the DHCPv6 address pools configured
on the device.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ipv6 dhcp pool [<DHCPv6-address-pool-name>]
Mode User Exec and Privileged Exec
Example
awplus# show ipv6 dhcp pool
Output Figure 56-9: Example output from the show ipv6 dhcp pool command
Parameter Description
<DHCPv6-address-
pool-name>
Name of a specific DHCPv6 address pool. This displays the
configuration of the specified DHCPv6 address pool only.
awplus# show ipv6 dhcp pool
DHCPv6 Pool: ia-na
Address Prefix : 1001::/64
Lifetime: 2592000(valid), 604800(preferred)
DNS Server: 2001::1
DNS Server: 2001::2
Domain Name: example.com
Domain Name: example.co.jp
SNTP Server: 2001::5
SNTP Server: 2001::6
Option Code : 150
Value: [ASCII] test-test
DHCPv6 Pool: ia-pd
PD Pool Name: pd1
Prefix : 2002::/38-42
Lifetime : 2592000(valid), 604800(preferred)
Table 6: Parameters in the output of the show ipv6dhcp pool command
Parameter Description
DHCPv6 Pool Name of the DHCPv6 pool.
Address Prefix Address prefix to the DHCPv6 pool.
To Next Page
Loading...
Need help?
General
