C613-50100-01 REV C Command Reference for x930 Series 2800
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DHCP FOR IPV6 (DHCPV6) COMMANDS
SHOW
IPV6 DHCP INTERFACE
Example 2 To display DHCPv6 information for interface vlan2, use the command:
awplus# show ipv6 dhcp interface vlan2
Output Figure 56-8: Example output from the show ipv6 dhcp interface vlan2
command
Related
Commands
ipv6 dhcp client pd
awplus# show ipv6 dhcp interface vlan2
vlan2 is in client (Prefix-Delegation) mode
Prefix name pd1
prefix 2002:0:3c0::/42
preferred lifetime 604800, valid lifetime 2592000
starts at 20 Aug 2012 09:21:33
expires at 19 Sep 2012 09:21:33
Table 5: Parameters in the output of the show counter dhcp-client command
Parameter Description
<interface> is in
server/client/(Prefix-
Delegation) mode
Displays whether the specified interface is in server
or client mode and whether prefix-delegation is
applied to an interface.
Address Displays the address of the DHCPv6 server on the
interface.
Prefix name Displays the IPv6 general prefix pool name, where
prefixes are stored for the interface.
Using pool Displays the name of the pool used by the interface.
Preference Displays the preference value for the DHCPv6
server.
To Next Page
Loading...
Need help?
General
