C613-50100-01 REV C Command Reference for x930 Series 681
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
POWER OVER ETHERNET COMMANDS
SHOW
POWER-INLINE COUNTERS
show power-inline counters
Overview This command displays Power over Ethernet (PoE) event counters for ports on the
Power Sourcing Equipment (PSE). The PoE event counters displayed can also be
accessed by objects in the PoE MIB (RFC 3621). See the MIB Objects Feature
Overview and Configuration Guide for information about which PoE MIB objects
are supported.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show power-inline counters [<port-list>]
Mode User Exec and Privileged Exec
Examples To display all PoE event counters for all PoE ports, use the command:
awplus# show power-inline counters
To display the PoE event counters for the port range 1.0.1 to 1.0.3, use the
command:
awplus# show power-inline counters interface port1.0.1-1.0.3
Output Figure 18-3: Example output from the show power-inline counters command
Parameter Description
<port-list> Enter the PoE port(s) to display PoE event counters for them.
awplus#show power-inline counters interface port1.0.4-port1.0.12
PoE Counters:
Interface MPSAbsent Overload Short Invalid Denied
port1.0.4 0 0 0 0 0
port1.0.5 0 0 0 0 0
port1.0.6 0 0 0 0 0
port1.0.7 0 0 0 0 0
port1.0.8 0 0 0 0 0
port1.0.9 0 0 0 0 0
port1.0.10 0 0 0 0 0
port1.0.11 0 0 0 0 0
port1.0.12 0 0 0 0 0
To Next Page
Loading...
Need help?
General
