Allied Telesis AlliedWare Plus - Match Inner-Cos

C613-50100-01 REV C Command Reference for x930 Series 2004
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
QOS COMMANDS
MATCH
INNER-COS
match inner-cos
Overview Sets the Inner CoS for a class-map to match on.
Use the no variant of this command to remove CoS.
Syntax
match inner-cos <0-7>
no match inner-cos
Mode Class Map Configuration
Examples To set the class-map’s inner-cos to 4, use the commands:
awplus# configure terminal
awplus(config)# class-map cmap1
awplus(config-cmap)# match inner-cos 4
To remove CoS from the class-map, use the commands:
awplus# configure terminal
awplus(config)# class-map cmap1
awplus(config-cmap)# no match inner-cos
Parameter Description
<0-7> Specify the Inner CoS value.