C613-50100-01 REV C Command Reference for x930 Series 1735
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
PIM-SM COMMANDS
IP
PIM REGISTER-RATE-LIMIT
ip pim register-rate-limit
Overview Use this command to configure the rate of register packets sent by this DR, in units
of packets per second.
Use the no variant of this command to remove the limit.
Syntax
ip pim register-rate-limit <1-65535>
no ip pim register-rate-limit
Mode Global Configuration
Example
awplus# configure terminal
awplus(config)# ip pim register-rate-limit 3444
Parameter Description
<1-65535> Specifies the maximum number of packets that can be sent per
second.
To Next Page
Loading...
Need help?
General
