C613-50100-01 REV C Command Reference for x930 Series 1840
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
PIM-DM COMMANDS
IP
PIM EXT-SRCS-DIRECTLY-CONNECTED (PIM-DM)
ip pim ext-srcs-directly-connected (PIM-DM)
Overview Use this command to configure PIM to treat all source traffic arriving on the
interface as though it was sent from a host directly connected to the interface.
This command is described in detail in the PIM-SM Commands chapter. See the ip
pim ext-srcs-directly-connected (PIM-SM) command.