C613-50100-01 REV C Command Reference for x930 Series 2352
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
TACACS+ COMMANDS
SHOW
TACACS+
show tacacs+
Overview This command displays the current TACACS+ server configuration and status.
Syntax
show tacacs+
Mode User Exec and Privileged Exec
Example To display the current status of TACACS+ servers, use the command:
awplus# show tacacs+
Output Figure 48-1: Example output from the show tacacs+ command
TACACS+ Global Configuration
Timeout : 5 sec
Server Host/ Server
IP Address Status
------------------------------------------------------------
192.168.1.10 Alive
192.168.1.11 Unknown
Table 1: Parameters in the output of the show tacacs+ command
Output Parameter Meaning
Timeout A time interval in seconds.
Server Host/IP Address TACACS+ server hostname or IP address.
Server Status The status of the authentication port.
Alive The server is alive.
Dead The server has timed out.
Error The server is not responding or
there is an error in the key string
entered.
Unknown The server is never used or the
status is unkown.
Unreachable The server is unreachable.
Unresolved The server name can not be
resolved.
To Next Page
Loading...
Need help?
General
