C613-50100-01 REV C Command Reference for x930 Series 787
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DOMAIN NAME SERVICE (DNS) COMMANDS
IP
DNS FORWARDING RETRY
ip dns forwarding retry
Overview Use this command to set the number of times DNS Relay will retry to forward DNS
queries. The device stops sending DNS requests to an unresponsive server at the
time set using the ip dns forwarding dead-time command and when all of the
retries are used.
Use the no variant of this command to set the number of retries to the default of 2.
Syntax
ip dns forwarding retry <0-100>
no ip dns forwarding retry
Default The default number of retries is 2 DNS requests to an unresponsive server.
Mode Global Configuration
Usage See the IP Feature Overview and Configuration Guide for more information about
DNS Relay. See the ip dns forwarding dead-time command used with this
command.
Examples To set the DNS forwarding retry count to 50 and to set the DNS forwarding
dead-time to 1800 seconds, use the commands:
awplus# configure terminal
awplus(config)# ip dns forwarding retry 50
awplus(config)# ip dns forwarding dead-time 1800
To reset the DNS retry count to the default of 2 and the DNS forwarding dead-time
to the default of 3600 seconds, use the commands:
awplus# configure terminal
awplus(config)# no ip dns forwarding retry
awplus(config)# no ip dns forwarding dead-time
Related
Commands
debug ip dns forwarding
ip dns forwarding
ip dns forwarding dead-time
show ip dns forwarding
Parameter Description
<0-100> Set the number of times DNS Relay will retry to forward a DNS query.
To Next Page
Loading...
Need help?
General
