C613-50100-01 REV C Command Reference for x930 Series 1382
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
SHOW
BGP IPV6 PATHS (BGP4+ ONLY)
show bgp ipv6 paths (BGP4+ only)
Overview Use this command to display BGP4+ path information within an IPv6 environment.
Use the show ip bgp paths (BGP only) command to display BGP path information
within an IPv4 environment.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show bgp ipv6 paths
Mode User Exec and Privileged Exec
Example
awplus# show bgp ipv6 paths
Related
Commands
show ip bgp paths (BGP only)
To Next Page
Loading...
Need help?
General
