C613-50100-01 REV C Command Reference for x930 Series 761
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IP ADDRESSING AND PROTOCOL COMMANDS
SHOW
IP INTERFACE VRF
show ip interface vrf
Use this command to display protocol and status information about configured
interfaces and their assigned IP addresses in VRF lite instances.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip interface [vrf <vrf-name>|global]
Mode User Exec and Privileged Exec
Examples To display all interfaces and IP addresses associated with a VRF lite instance red,
use the command:
awplus# show ip interface vrf red
Output Figure 20-8: Example output from theshow ip interfaceVRF lite instance red
command
Example To display all interfaces and IP addresses associated with all VRF lite instances, use
the command:
awplus# show ip interface
Parameter Description
vrf A VRF lite instance.
<vrf-name> The name of a specific VRF lite instance.
global The global routing and forwarding table.
[VRF: red]
Interface IP-Address Status Protocol
lo1 unassigned admin up running
vlan1 192.168.10.1/24 admin up running
To Next Page
Loading...
Need help?
General
