C613-50100-01 REV C Command Reference for x930 Series 1752
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
PIM-SM COMMANDS
SHOW
IP PIM SPARSE-MODE INTERFACE DETAIL
show ip pim sparse-mode interface detail
Overview Use this command to show detailed information on a PIM-SM interface.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip pim sparse-mode interface detail
Mode User Exec and Privileged Exec
Output Figure 34-3: Example output from the show ip pim sparse-mode interface
detail command
vlan3 (vif 3):
Address 192.168.1.149, DR 192.168.1.149
Hello period 30 seconds, Next Hello in 15 seconds
Triggered Hello period 5 seconds
Neighbors:
192.168.1.22
vlan2 (vif 0):
Address 10.10.11.149, DR 10.10.11.149
Hello period 30 seconds, Next Hello in 18 seconds
Triggered Hello period 5 seconds
Neighbors:
10.10.11.4
To Next Page
Loading...
Need help?
General
