C613-50100-01 REV C Command Reference for x930 Series 2226
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
AAA COMMANDS
AAA
AUTHENTICATION ENABLE DEFAULT LOCAL
aaa authentication enable default local
Overview This command enables AAA authentication to determine the privilege level a user
can access for passwords authenticated locally.
Syntax
aaa authentication enable default local
Default Local privilege level authentication is enabled by default.
Mode Global Configuration
Usage The privilege level configured for a particular user in the local user database is the
privilege threshold above which the user is prompted for an enable (Privileged
Exec mode) command.
Examples To enable local privilege level authentication command, use the following
commands:
awplus# configure terminal
awplus(config)# aaa authentication enable default local
To disable privilege level authentication, use the following commands:
awplus# configure terminal
awplus(config)# no aaa authentication enable default
Related
Commands
aaa authentication enable default group tacacs+
aaa authentication login
enable (Privileged Exec mode)
enable password
enable secret
tacacs-server host
To Next Page
Loading...
