Allied Telesis AlliedWare Plus User Manual

C613-50100-01 REV C Command Reference for x930 Series 521
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VLAN COMMANDS
SHOW
VLAN CLASSIFIER GROUP INTERFACE
show vlan classifier group interface
Overview Use this command to display information about a single switch port interface for
all configured VLAN classifier groups.
Syntax
show vlan classifier group interface <switch-port>
Mode User Exec and Privileged Exec
Usage All configured VLAN classifier groups are shown for a single interface.
Example To display VLAN classifier group information for switch port interface port1.0.2,
enter the command:
awplus# show vlan classifier group interface port1.0.2
Output Figure 15-3: Example output from the show vlan classifier group interface
port1.0.1 command:
Related
Commands
vlan classifier group
show vlan classifier interface group
Parameter Description
<switch-port> Specify the switch port interface classifier group identifier
vlan classifier group 1 interface port1.0.1

Allied Telesis AlliedWare Plus Specifications

General

Brand	Allied Telesis
Model	AlliedWare Plus
Category	Switch
Language	English