C613-50100-01 REV C Command Reference for x930 Series 2432
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VIRTUAL CHASSIS STACKING (VCSTACK™) COMMANDS
SHOW
COUNTER STACK
show counter stack
Overview Use this command to display stack related counter information.
Syntax
show counter stack
Default All counters are reset when the stack member is rebooted.
Mode User Exec and Privileged Exec
Usage This displays the stacking counter information for every stack member.
Examples To display the stacking counter information about the whole stack, use the
following command.
awplus# show counter stack
Figure 51-1: Example output from the show counter stack command
Virtual Chassis Stacking counters
Stack member 1:
Topology Event counters
Units joined .........1
Units left .........0
Links up .........1
Links down .........0
ID conflict .........0
Master conflict .........0
Master failover .........0
Master elected .........1
Master discovered .........0
SW autoupgrades .........0
Stack Port 1 Topology Event counters
Link up .........3
Link down .........2
Nbr re-init .........0
Nbr incompatible .........0
Nbr 2way comms .........1
Nbr full comms .........1
Stack Port 2 Topology Event counters
Link up .........0
Link down .........0
Nbr re-init .........0
Nbr incompatible .........0
Nbr 2way comms .........0
Nbr full comms .........0
To Next Page
Loading...
Need help?
General
