C613-50100-01 REV C Command Reference for x930 Series 2433
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VIRTUAL CHASSIS STACKING (VCSTACK™) COMMANDS
SHOW
COUNTER STACK
Topology Message counters
Tx Total .........4
Tx Hellos .........4
Tx Topo DB .........0
Tx Topo update .........0
Tx Link event .........0
Tx Reinitialise .........0
Tx Port 1 .........4
Tx Port 2 .........0
Tx 1-hop transport .........4
Tx Layer-2 transport .........0
Rx Total .........1
Rx Hellos .........1
Rx Topo DB .........0
Rx Topo update .........0
Rx Link event .........0
Rx Reinitialise .........0
Rx Port 1 .........1
Rx Port 2 .........0
Rx 1-hop transport .........1
Rx Layer-2 transport .........0
Topology Error counters
Version unsupported .........0
Product unsupported .........0
XEM unsupported .........0
Too many units .........0
Invalid messages .........0
Resiliency Link counters
Health status good .........1
Health status bad .........0
Tx .........0
Tx Error .........0
Rx ......3600
Rx Error .........0
Stack member 2:
-- Output repeated for other stack members - details not shown --
Table 1: Parameters in the output of the show counter stack command
Parameters Description
Topology Event Counters
Units joined Number of times that the stack acquires a member.
Units left Number of times that the stack loses a member.
Links up Number of times that a stack link is up in the stack.
Links down Number of times that a stack link is down in the stack.
To Next Page
Loading...
Need help?
General
