C613-50100-01 REV C Command Reference for x930 Series 549
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VLAN COMMANDS
VLAN
CLASSIFIER GROUP
vlan classifier group
Overview Use this command to create a group of VLAN classifier rules. The rules must already
have been created.
Use the no variant of this command to delete a group of VLAN classifier rules.
Syntax
vlan classifier group <1-16> {add|delete} rule
<vlan-class-rule-id>
no vlan classifier group <1-16>
Mode Global Configuration
Example
awplus# configure terminal
awplus(config)# vlan classifier group 3 add rule 5
Related
Commands
show vlan classifier rule
vlan classifier activate
vlan classifier rule ipv4
vlan classifier rule proto
Parameter Description
<1-16> VLAN classifier group identifier
add Add the rule to the group.
delete Delete the rule from the group.
<vlan-class-rule-id> The VLAN classifier rule identifier.
To Next Page
Loading...
Need help?
General
