C613-50100-01 REV C Command Reference for x930 Series 2488
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VRRP COMMANDS
SHOW
VRRP
show vrrp
Overview Use this command to display information about all VRRP IPv4 sessions. This
command shows a summary when the optional brief parameter is used.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
See the VRRP Feature Overview and Configuration Guide for more information
about VRRPv3 IPv4 configuration details.
Syntax
show vrrp [brief]
Mode User Exec and Privileged Exec
Example To display information about all VRRP IPv4 sessions, enter the command:
awplus# show vrrp
To display brief summary output about VRRP IPv4 sessions, enter the command:
awplus# show vrrp brief
Output Figure 52-3: Example output from the show vrrp command
Figure 52-4: Example output from the show vrrp brief command
Parameter Description
brief Brief summary of VRRP sessions.
awplus#show vrrp
VMAC enabled
Address family IPv4
VRRP Id: 1 on interface: vlan2
State: AdminUp - Master
Virtual IP address: 192.168.1.2 (Not-owner)
Priority is 100
Advertisement interval: 100 centiseconds
Preempt mode: TRUE
Multicast membership on IPv4 interface vlan2: JOINED
Transition mode: FALSE
Accept mode: FALSE
Master address: 192.168.1.3
awplus#show vrrp brief
Interface Grp Prio Own Pre State Master addr Group addr
vlan10 1 200 N P Master 192.168.10.4 192.168.10.253
vlan10 2 150 N P Backup 192.168.10.4 192.168.10.254
vlan11 3 200 N P Master 192.168.11.4 192.168.11.253
vlan11 4 150 N P Backup 192.168.11.4 192.168.11.254
To Next Page
Loading...
Need help?
General
