Allied Telesis AlliedWare Plus - Show Debugging Dot1 X

C613-50100-01 REV C Command Reference for x930 Series 2072
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
802.1X COMMANDS
SHOW
DEBUGGING DOT1X
show debugging dot1x
Overview Use this command to display the 802.1X debugging option set.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show debugging dot1x
Mode User Exec and Privileged Exec
Usage This is a sample output from the show debugging dot1x command.
awplus# debug dot1x
awplus# show debugging dot1x
Related
Commands
debug dot1x
802.1X debugging status:
802.1X events debugging is on
802.1X timer debugging is on
802.1X packets debugging is on
802.1X NSM debugging is on