C613-50100-01 REV C Command Reference for x930 Series 699
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
GVRP COMMANDS
SHOW
DEBUGGING GVRP
show debugging gvrp
Overview Use this command to display the GVRP debugging option set.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show debugging gvrp
Mode User Exec and Privileged Exec
Example Enter the following commands to display GVRP debugging output on the console:
awplus# configure terminal
awplus(config)# debug gvrp all
awplus(config)# exit
awplus# show debugging gvrp
Output See sample output from the show debugging gvrp command after entering
debug gvrp all:
Related
Commands
debug gvrp
GVRP debugging status:
GVRP Event debugging is on
GVRP CLI debugging is on
GVRP Timer debugging is on
GVRP Packet debugging is on
To Next Page
Loading...
Need help?
General
