C613-50100-01 REV C Command Reference for x930 Series 197
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
USER ACCESS COMMANDS
SHOW
USERS
show users
Overview This command shows information about the users who are currently logged into
the device.
Syntax
show users
Mode User Exec and Privileged Exec
Example To show the users currently connected to the device, use the command:
awplus# show users
Output Figure 3-5: Example output from the show users command
Line User Host(s) Idle Location Priv Idletime Timeout
con 0 manager idle 00:00:00 ttyS0 15 10 N/A
vty 0 bob idle 00:00:03 172.16.11.3 1 0 5
Table 1: Parameters in the output of the show users command
Parameter Description
Line Console port user is connected to.
User Login name of user.
Host(s) Status of the host the user is connected to.
Idle How long the host has been idle.
Location URL location of user.
Priv The privilege level in the range 1 to 15, with 15 being the highest.
Idletime The time interval the device waits for user input from either a
console or VTY connection.
Timeout The time interval before a server is considered unreachable.
To Next Page
Loading...
Need help?
General
