C613-50100-01 REV C Command Reference for x930 Series 401
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LOGGING COMMANDS
SHOW
LOG PERMANENT
show log permanent
Overview This command displays the contents of the permanent log.
Syntax
show log permanent [<stack-ID>] [tail [<10-250>]]
Default If the optional tail parameter is specified only the latest 10 messages in the
permanent log are displayed. A numerical value can be specified after the tail
parameter to select how many of the latest messages should be displayed.
Mode User Exec, Privileged Exec and Global Configuration
Example To display the permanent log of stack member 2, use the command:
awplus# show log permanent 2
Output Figure 9-5: Example output from the show log permanent command
Related
Commands
clear log permanent
default log permanent
log permanent
Parameter Description
<stack-ID> Stack member number, from 1 to 8.
tail Display only the latest log entries.
<10-250> Specify the number of log entries to display.
awplus#show log permanent 2
Stack member 2:
<date> <time> <facility>.<severity>
<program[<pid>]>: <message>
-------------------------------------------------------------------------
2014 Feb 25 09:10:48 daemon.crit awplus-2 HPI: HOTSWAP Pluggable 2.0.51 hotswapped
in: AT-StackXS/1.0
2014 Feb 25 09:10:48 daemon.crit awplus-2 HPI: HOTSWAP Pluggable 2.0.52 hotswapped
in: 2127931-2
2014 Feb 25 09:10:50 user.crit awplus-2 VCS[922]: Member 1 (eccd.6d7d.a50e) has
joined the stack
2014 Feb 25 09:10:52 user.crit awplus-2 VCS[922]: Member 1 (eccd.6d7d.a50e) has
become the Active Master
2014 Feb 25 09:10:52 local6.alert awplus-2 VCS[922]: stack member has booted from
non-default location, SW version auto synchronization cannot be supported.
2014 Feb 25 09:10:52 user.crit awplus-2 VCS[922]: Stack Virtual MAC is
0000.cd37.0002
2014 Feb 25 09:11:46 user.crit awplus-2 ATMF[862]: awplus-x510 has joined. 1
member in total.
To Next Page
Loading...
Need help?
General
