C613-50100-01 REV C Command Reference for x930 Series 400
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LOGGING COMMANDS
SHOW
LOG CONFIG
In the above example the ’*’ next to filter 1 in the buffered log configuration
indicates that this is the default filter. The permanent log has had its default filter
removed, so none of the filters are marked with “*’.
NOTE: Terminal log and console log cannot be set at the same time. If console logging
is enabled then the terminal logging is turned off.
Related
Commands
show counter log
show log
show log permanent
Host 10.32.16.21:
Time offset .... +2:00
Offset type .... UTC
Source ......... -
Secured ........ enabled
Filters:
1 Level ........ critical
Program ...... any
Facility ..... any
Message text . any
Statistics ..... 1327 messages received, 1 accepted by filter (2016 Oct 11
10:36:16)
Email admin@alliedtelesis.com:
Time offset .... +0:00
Offset type .... Local
Filters:
1 Level ........ emergencies
Program ...... any
Facility ..... any
Message text . any
Statistics ..... 1327 messages received, 0 accepted by filter (2016 Oct 11
10:36:16)
...
To Next Page
Loading...
Need help?
General
