C613-50100-01 REV C Command Reference for x930 Series 2993
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SECURE SHELL (SSH) COMMANDS
SSH
SERVER MAX-AUTH-TRIES
ssh server max-auth-tries
Overview Use this command to specify the maximum number of SSH authentication
attempts that the device will allow.
Use the no variant of this command to return the maximum number of attempts
to its default value of 6.
Syntax
ssh server max-auth-tries <1-32>
no ssh server max-auth-tries
Default 6 attempts
Mode Global Configuration
Usage By default, users must wait one second after a failed login attempt before trying
again. You can increase this gap by using the command aaa login fail-delay.
Example To set the maximum number of SSH authentication attempts to 3, use the
commands:
awplus# configure terminal
awplus(config)# ssh server max-auth-tries 3
Related
Commands
show ssh server
Parameter Description
<1-32>
Maximum number of SSH authentication attempts the device will
allow.
To Next Page
Loading...
Need help?
General
