C613-50100-01 REV C Command Reference for x930 Series 2793
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DHCP FOR IPV6 (DHCPV6) COMMANDS
SHOW
COUNTER IPV6 DHCP-SERVER
show counter ipv6 dhcp-server
Overview Use this command in User Exec or Privileged Exec mode to show DHCPv6 server
counter information. See show counter ipv6 dhcp-client for DHCPv6 client
information.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show counter ipv6 dhcp-server
Mode User Exec and Privileged Exec
Example To display the DHCPv6 server counter information, use the command:
awplus# show counter ipv6 dhcp-server
Output Figure 56-3: Example output from the show counter ipv6 dhcp-server
command
awplus#show counter ipv6 dhcp-server
SOLICIT in ......... 20
ADVERTISE out ......... 12
REQUEST in ......... 1
CONFIRM in ......... 0
RENEW in ......... 0
REBIND in ......... 0
REPLY out ......... 0
RELEASE in ......... 0
DECLINE in ......... 0
INFORMATION-REQUEST in ......... 0
Table 2: Parameters in the output of the show counter ipv6 dhcp-server
command
Parameter Description
SOLICIT in Displays the count of SOLICIT messages received by the DHCPv6
server.
ADVERTISE out Displays the count of ADVERTISE messages sent by the DHCPv6
server.
REQUEST in Displays the count of REQUEST messages received by the
DHCPv6 server.
CONFIRM in Displays the count of CONFIRM messages received by the
DHCPv6 server.
RENEW in Displays the count of RENEW messages received by the DHCPv6
server.
To Next Page
Loading...
Need help?
General
