C613-50100-01 REV C Command Reference for x930 Series 3078
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SFLOW COMMANDS
SHOW
RUNNING-CONFIG SFLOW
show running-config sflow
Overview This command displays the running system information specific to the sFlow
feature.
Syntax
show running-config sflow
Mode Privileged Exec and Global Configuration
Example To display the sFlow running configuration information, use the command:
awplus# show running-config sflow
Output Figure 65-2: Example output from the show running-config sflow command
Related
Commands
show running-config
awplus#sh run sflow
!
sflow agent ip 192.0.2.33
sflow collector ip 192.0.2.65
sflow collector max-datagram-size 1200
sflow enable
!
interface port1.0.11-port1.0.22
sflow sampling-rate 512
To Next Page
Loading...
