C613-50100-01 REV C Command Reference for x930 Series 3009
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
TRIGGER COMMANDS
SHOW
DEBUGGING TRIGGER
show debugging trigger
Overview This command displays the current status for trigger utility debugging. Use this
command to show when trigger debugging has been turned on or off from the
debug trigger command.
Syntax
show debugging trigger
Mode User Exec and Privileged Exec
Example To display the current configuration of trigger debugging, use the command:
awplus# show debugging trigger
Output Figure 63-1: Example output from the show debugging trigger command
Related
Commands
debug trigger
awplus#debug trigger
awplus#show debugging trigger
Trigger debugging status:
Trigger debugging is on
awplus#no debug trigger
awplus#show debugging trigger
Trigger debugging status:
Trigger debugging is off
To Next Page
Loading...
Need help?
General
