C613-50100-01 REV C Command Reference for x930 Series 2412
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OPENFLOW COMMANDS
SHOW
OPENFLOW CONFIG
show openflow config
Overview Use this command to display the OpenFlow configuration database on the switch.
Syntax
show openflow config
Mode User Exec/Privileged Exec
Example To show the contents of the OpenFlow configuration database on the switch:
awplus# show openflow config
Output Figure 50-2: Example output from show openflow config
awplus# show openflow config
fdf075ee-7485-4588-9885-1f0333df89a2
Bridge "br0"
Controller "tcp:192.168.1.2:6653"
is_connected: true
fail_mode: secure
Port "port1.0.4"
Interface "port1.0.4"
type: system
options: {ifindex="5004", mtu="1500",
native_vlan="4090"}
Port "port1.0.3"
Interface "port1.0.3"
type: system
options: {ifindex="5003", mtu="1500",
native_vlan="4090"}
Port "br0"
Interface "br0"
type: internal
Port "port1.0.1"
Interface "port1.0.1"
type: system
options: {ifindex="5001", mtu="1500",
native_vlan="4090"}
Port "port1.0.2"
Interface "port1.0.2"
type: system
options: {ifindex="5002", mtu="1500",
native_vlan="4090"}
Table 50-1: Parameters in the output from show openflow config
Parameter Description
First line The switch ID
Bridge “br0” The configuration of Bridge “br0”
To Next Page
