C613-50100-01 REV C Command Reference for x930 Series 520
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VLAN COMMANDS
SHOW
VLAN CLASSIFIER GROUP
show vlan classifier group
Overview Use this command to display information about all configured VLAN classifier
groups or a specific group.
Syntax
show vlan classifier group [<1-16>]
Mode User Exec and Privileged Exec
Usage If a group ID is not specified, all configured VLAN classifier groups are shown. If a
group ID is specified, a specific configured VLAN classifier group is shown.
Example To display information about VLAN classifier group 1, enter the command:
awplus# show vlan classifier group 1
Related
Commands
vlan classifier group
Parameter Description
<1-16> VLAN classifier group identifier
To Next Page
Loading...
