Allied Telesis AlliedWare Plus - Radius-Secure-Proxy Local-Server

C613-50100-01 REV C Command Reference for x930 Series 2302
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LOCAL RADIUS SERVER COMMANDS
RADIUS
-SECURE-PROXY LOCAL-SERVER
radius-secure-proxy local-server
Overview Use this command to enter the RadSecProxy local-server application configuration
mode. This application allows remote RadSec clients to communicate with the
local RADIUS server process via a secure (TLS) proxy.
Syntax
radius-secure-proxy local-server
Mode Global Configuration Mode
Example To change mode from User Exec mode to the RadSecProxy local-server
configuration mode, use the commands:
awplus# configure terminal
awplus(config)# radius-secure-proxy local-server
awplus(config-radsecproxy-srv)#
Related
Commands
client (radsecproxy-srv)
client name-check
client trustpoint