C613-50100-01 REV C Command Reference for x930 Series 2436
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VIRTUAL CHASSIS STACKING (VCSTACK™) COMMANDS
SHOW
DEBUGGING STACK
show debugging stack
Overview This command shows which debugging modes are currently enabled for stacking.
Syntax
show debugging stack
Mode User Exec and Privileged Exec
Example To display the stack debugging mode status, use the command:
awplus# show debugging stack
Figure 51-2: Example output from the show debugging stack command
Related
Commands
debug stack
Virtual Chassis Stacking debugging status:
VCS link debugging is on
VCS topology debugging is on
VCS trace debugging is on
To Next Page
Loading...
