C613-50100-01 REV C Command Reference for x930 Series 1808
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
PIM-SMV6 COMMANDS
SHOW
IPV6 PIM SPARSE-MODE BSR-ROUTER
show ipv6 pim sparse-mode bsr-router
Overview Use this command to show the PIM-SMv6 Bootstrap Router (BSR) IPv6 address.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ipv6 pim sparse-mode bsr-router
Mode User Exec and Privileged Exec
Example To display the BSR IPv6 address, use the command:
awplus# show ipv6 pim sparse-mode bsr-router
Output Figure 35-3: Example output from the show ipv6 pim sparse-mode bsr-router
command
Related
commands
show ipv6 pim sparse-mode rp mapping
show ipv6 pim sparse-mode neighbor
awplus#show ipv6 pim sparse-mode bsr-router
PIM6v2 Bootstrap information
BSR address: 2001:203::213 (?)
Uptime: 00:36:25, BSR Priority: 64, Hash mask length: 126
Expires: 00:01:46
Role: Candidate BSR
State: Candidate BSR
Candidate RP: 2001:5::211(vlan5)
Advertisement interval 60 seconds
Next C-RP advertisement in 00:00:43
To Next Page
Loading...
Need help?
General
