C613-50100-01 REV C Command Reference for x930 Series 259
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
CLOCK
show clock
Overview This command displays the system’s current configured local time and date. It also
displays other clock related information such as timezone and summertime
configuration.
Syntax
show clock
Mode User Exec and Privileged Exec
Example To display the system’s current local time, use the command:
awplus# show clock
Output Figure 7-1: Example output from the show clock command for a device using
New Zealand time
Local Time: Mon, 17 Oct 2016 13:56:06 +1200
UTC Time: Mon, 17 Oct 2016 01:56:06 +0000
Timezone: NZST
Timezone Offset: +12:00
Summer time zone: NZDT
Summer time starts: Last Sunday in September at 02:00:00
Summer time ends: First Sunday in April at 02:00:00
Summer time offset: 60 mins
Summer time recurring: Yes
Table 1: Parameters in the output of the show clock command
Parameter Description
Local Time Current local time.
UTC Time Current UTC time.
Timezone The current configured timezone name.
Timezone Offset Number of hours offset to UTC.
Summer time zone The current configured summertime zone name.
Summer time starts Date and time set as the start of summer time.
Summer time ends Date and time set as the end of summer time.
Summer time offset Number of minutes that summer time is offset from the
system’s timezone.
Summer time
recurring
Whether the device will apply the summer time settings
every year or only once.