C613-50100-01 REV C Command Reference for x930 Series 1376
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
SHOW
BGP IPV6 FILTER-LIST (BGP4+ ONLY)
show bgp ipv6 filter-list (BGP4+ only)
Overview Use this command to display routes conforming to the filter-list within an IPv6
environment. Use the show ip bgp filter-list (BGP only) command to display routes
conforming to the filter-list within an IPv4 environment.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show bgp ipv6 filter-list <listname>
Mode User Exec and Privileged Exec
Example
awplus# show bgp ipv6 filter-list mylist
Related
Commands
show ip bgp filter-list (BGP only)
Parameter Description
<listname> Specifies the regular-expression access list name.
To Next Page
Loading...
Need help?
General
