Allied Telesis AlliedWare Plus - Bgp Rfc1771-Path-Select (BGP Only)

C613-50100-01 REV C Command Reference for x930 Series 1197
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
BGP
RFC1771-PATH-SELECT (BGP ONLY)
bgp rfc1771-path-select (BGP only)
Overview Use this command to set the RFC1771 compatible path selection mechanism.
Use the no variant of this command to revert this setting.
Syntax
bgp rfc1771-path-select
no bgp rfc1771-path-select
Default Industry standard compatible path selection mechanism.
Mode Global Configuration
Example
awplus# configure terminal
awplus(config)# bgp rfc1771-path-select