C613-50100-01 REV C Command Reference for x930 Series 2481
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VRRP COMMANDS
ROUTER
IPV6 VRRP (INTERFACE)
router ipv6 vrrp (interface)
Overview Use this command to configure VRRPv3 for IPv6 and define the interface that will
participate in virtual routing to send and receive advertisement messages. This
command allows you to enter the Router Configuration mode.
Use the no variant of this command to remove the VRRPv3 for IPv6 configuration.
Disable the VRRP session before using the no variant of this command.
Syntax
router ipv6 vrrp <vrid> <interface>
no router ipv6 vrrp <vrid> <interface>
Mode Global Configuration
Usage Use the required <interface> placeholder to define the interface that will
participate in virtual routing. This interface is used for two purposes - to
send/receive advertisement messages and to forward on behalf of the virtual
router when in master state.
You can configure up to 255 IPv4 and 255 IPv6 VRRP instances. However,
configuring a high number of instances may adversely affect the device's
performance, depending on the device CPU, the other protocols it is running, and
whether you set the advertisement interval to less than 1 second.
See the VRRP Feature Overview and Configuration Guide for more information
about VRRPv3 IPv6 configuration details.
Examples The example below shows you how to enable a VRRPv3 session with VR ID 3 on
vlan2:
awplus# configure terminal
awplus(config)# router ipv6 vrrp 3 vlan2
awplus(config-router)# enable
awplus(config-router)#
The example below shows you how to disable a VRRPv3 session with VR ID 3 on
vlan2:
awplus(config-router)# disable
awplus(config-router)# exit
awplus(config)# no router ipv6 vrrp 3 vlan2
awplus(config)#
Parameter Description
<vrid> <1-255> The ID of the virtual router VRRPv3 IPv6 session to create.
<interface> Specify the name of the interface that will participate in the virtual
routing. The interface must exist on the router. The interface
specified sends and receives VRRPv3 IPv6 advertisement messages.
To Next Page
Loading...
Need help?
General
