C613-50100-01 REV C Command Reference for x930 Series 1551
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VRF LITE COMMANDS
SHOW
IP BGP FILTER-LIST (BGP ONLY)
show ip bgp filter-list (BGP only)
Overview Use this command to display routes conforming to the filter-list within an IPv4
environment. Use the show bgp ipv6 filter-list (BGP4+ only) command to display
routes conforming to the filter-list within an IPv6 environment
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip bgp filter-list <listname>
Syntax [VRF] show ip bgp [global|vrf <vrf-name>] filter-list <listname>
Mode User Exec and Privileged Exec
Example
awplus# show ip bgp filter-list mylist
awplus# show ip bgp vrf red filter-list mylist
Related
Commands
show bgp ipv6 filter-list (BGP4+ only)
Parameter Description
global When VRF lite is configured, apply the command to the global routing
and forwarding table.
vrf Apply the command to the specified VRF instance.
<vrf-name> The name of the VRF instance.
<listname> Specifies the regular-expression access list name.
To Next Page
Loading...
Need help?
General
