C613-50100-01 REV C Command Reference for x930 Series 1550
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VRF LITE COMMANDS
SHOW
IP BGP DAMPENING (BGP ONLY)
The following example output shows that the internal route (i), has flapped 3
times and is now categorized as history (h).
Figure 30-6: Example output from the show ip bgp dampening flap-statistics
command
The following example output shows a dampened route in the 1.1.1.0/24
network.
Figure 30-7: Example output from the show ip bgp dampening
dampened-path command
Related
Commands
show bgp ipv6 dampening (BGP4+ only)
awplus# show ip bgp dampening flap-statistics
BGP table version is 1, local router ID is 30.30.30.77
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,S
Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Flaps Duration Reuse Path
hi1.1.1.0/24 10.100.0.62 3 00:01:20 i
awplus# show ip bgp dampening dampened-paths
BGP table version is 1, local router ID is 30.30.30.77
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,S
Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Reuse Path
di 1.1.1.0/24 10.100.0.62 00:35:10 i
Total number of prefixes 1
To Next Page
Loading...
