C613-50100-01 REV C Command Reference for x930 Series 2799
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DHCP FOR IPV6 (DHCPV6) COMMANDS
SHOW
IPV6 DHCP INTERFACE
show ipv6 dhcp interface
Overview Use this command in User Exec or Privileged Exec mode to display DHCPv6
information for a specified interface, or all interfaces when entered without the
interface parameter.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ipv6 dhcp interface [<interface-name>]
Mode User Exec and Privileged Exec
Example1 To display DHCPv6 information for all interfaces DHCPv6 is configured on, use the
command:
awplus# show ipv6 dhcp interface
Output Figure 56-7: Example output from the show ipv6 dhcp interface command
Parameter Description
<interface-name> Optional. Specify the name of the interface to show DHCPv6
information about. Omit this optional parameter to display
DHCPv6 information for all interfaces DHCPv6 is configured on.
awplus# show ipv6 dhcp interface
vlan1 is in client mode
Address 1001::3c0:1
preferred lifetime 9000, valid lifetime 5000
starts at 20 Jan 2012 09:21:35
expires at 20 Jan 2012 10:25:32
vlan2
is in client (Prefix-Delegation) mode
Prefix
name pd1
prefix 2002:0:3c0::/42
preferred lifetime 604800, valid lifetime 2592000
starts at 20 Aug 2012 09:21:33
expires at 19 Sep 2012 09:21:33
vlan3
is in server mode
Using
pool : pool-1;
Preference:
0
To Next Page
Loading...
Need help?
General
