Allied Telesis AlliedWare Plus - Terminal Resize

C613-50100-01 REV C Command Reference for x930 Series 201
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
USER ACCESS COMMANDS
TERMINAL
RESIZE
terminal resize
Overview Use this command to automatically adjust the number of rows of output on the
console, which the device will display before pausing, to the number of rows
configured on the user’s terminal.
Syntax
terminal resize
Mode User Exec and Privileged Exec
Usage When the user’s terminal size is changed, then a remote session via SSH or TELNET
adjusts the terminal size automatically. However, this cannot normally be done
automatically for a serial or console port. This command automatically adjusts the
terminal size for a serial or console port.
Examples The following example automatically adjusts the number of rows shown on the
console:
awplus# terminal resize
Related
Commands
length (asyn)
terminal length