34
C613-50100-01 REV C Command Reference for x930 Series 1713
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
PIM-SM Commands
Introduction
Overview This chapter provides an alphabetical reference of PIM-SM commands. For
commands common to PIM-SM and PIM-DM, see the Multicast Commands
chapter.
Command List •“clear ip pim sparse-mode bsr rp-set *” on page 1715
•“clear ip mroute pim sparse-mode” on page 1716
•“debug pim sparse-mode” on page 1717
•“debug pim sparse-mode timer” on page 1718
•“ip pim accept-register list” on page 1720
•“ip pim anycast-rp” on page 1721
•“ip pim bsr-border” on page 1722
•“ip pim bsr-candidate” on page 1723
•“ip pim cisco-register-checksum” on page 1724
•“ip pim cisco-register-checksum group-list” on page 1725
•“ip pim crp-cisco-prefix” on page 1726
•“ip pim dr-priority” on page 1727
•“ip pim exclude-genid” on page 1728
•“ip pim ext-srcs-directly-connected (PIM-SM)” on page 1729
•“ip pim hello-holdtime (PIM-SM)” on page 1730
•“ip pim hello-interval (PIM-SM)” on page 1731
•“ip pim ignore-rp-set-priority” on page 1732
•“ip pim jp-timer” on page 1733
•“ip pim neighbor-filter (PIM-SM)” on page 1734
To Next Page
Loading...
Need help?
General
