C613-50100-01 REV C Command Reference for x930 Series 855
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ROUTING COMMANDS
SHOW
IP ROUTE SUMMARY
show ip route summary
Overview This command displays a summary of the current RIB (Routing Information Base)
entries.
To modify the lines displayed, use the | (output modifier token); to save the output
to a file, use the > output redirection token.
Syntax
show ip route summary
Syntax (VRF lite) show ip route summary [vrf <vrf-name>|global]
Mode User Exec and Privileged Exec
Example To display a summary of the current RIB entries, use the command:
awplus# show ip route summary
Output Figure 23-4: Example output from the show ip route summary command
Example (VRF
lite)
Figure 23-5: Example output from the show ip route summary vrf red
command
Parameter Description
vrf Specific VRF instance.
<vrf-name> The name of the VRF instance.
global The global routing and forwarding table.
IP routing table name is Default-IP-Routing-Table(0)
IP routing table maximum-paths is 4
Route Source Networks
connected 5
ospf 2
Total 8
IP routing table name is Default-IP-Routing-Table(0)
IP routing table maximum-paths is 4
Route Source Networks
connected 1
Total 1
FIB 0
[VRF: red]
Route Source Networks
connected 1
ospf 2
Total 3
To Next Page
Loading...
