Allied Telesis AlliedWare Plus - Clear Line Vty

C613-50100-01 REV C Command Reference for x930 Series 167
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
USER ACCESS COMMANDS
CLEAR
LINE VTY
clear line vty
Overview This command resets a VTY line. If a session exists on the line then it is closed.
Syntax
clear line vty <0-32>
Mode Privileged Exec
Example To reset the first vty line, use the command:
awplus# clear line vty 1
Related
Commands
privilege level
line
show telnet
show users
Parameter Description
<0-32> Line number