C613-50100-01 REV C Command Reference for x930 Series 2633
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
SHOW
ATMF BACKUP
show atmf backup
Overview This command displays information about AMF backup status for all the nodes in
an AMF network. It can only be run on AMF master and controller nodes.
Syntax
show atmf backup [logs|server-status|synchronize [logs]]
Mode Privileged Exec
Example 1 To display the AMF backup information, use the command:
node_1# show atmf backup
To display log messages to do with backups, use the command:
node_1# show atmf backup logs
Parameter Description
logs Displays detailed log information.
server-status Displays connectivity diagnostics information for each
configured remote file server.
synchronize Display the file server synchronization status
logs For each remote file server, display the logs for the last
synchronization
Table 54-1: Output from show atmf backup
Node_1# show atmf backup
ScheduledBackup ......Enabled
Schedule............1 per day starting at 03:00
Next Backup Time....01 Oct 2016 03:00
Backup Bandwidth .....Unlimited
Backup Media..........SD (Total 1974.0 MB, Free197.6MB)
Current Action........Starting manual backup
Started...............30 Sep 2016 10:08
CurrentNode...........atmf_testbox1
Backup Redundancy ..... Enabled
Local media ......... SD (Total 3788.0MB, Free 3679.5MB)
State ............... Active
Node Name Date Time In ATMF On Media Status
--------------------------------------------------------------------------------
atmf_testbox1 30 Sep 2016 09:58:59 Yes Yes Good
atmf_testbox2 30 Sep 2016 10:01:23 Yes Yes Good
To Next Page
Loading...
Need help?
General
