C613-50100-01 REV C Command Reference for x930 Series 2634
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
SHOW
ATMF BACKUP
Example 2 To display the AMF backup synchronization status, use the command:
node_1# show atmf backup synchronize
To display log messages to do with synchronization of backups, use the command:
node_1# show atmf backup synchronize logs
Example 3 To display the AMF backup information with the optional parameter
server-status, use the command:
Node_1# show atmf backup server-status
Table 54-2: Output from show atmf backup logs
Node_1#show atmf backup logs
Backup Redundancy ..... Enabled
Local media ......... SD (Total 3788.0MB, Free 1792.8MB)
State ............... Inactive (Remote file server is not available)
Log File Location: card:/atmf/ATMF/logs/rsync_<node name>.log
Node
Name Log Details
--------------------------------------------------------------------------------
atmf_testbox
2016/09/30 18:16:51 [9045] receiving file list
2016/09/30 18:16:51 [9047] .d..t.... flash/
2016/09/30 18:16:52 [9047] >f+++++++ flash/a.rel
Table 54-3: Output from show atmf backup synchronize
Node_1#show atmf backup synchronize
ATMF backup synchronization:
* = Active file server
Id Date Time Status
------------------------------------------------------------------
-
1 30 Sep 2016 22:25:57 Synchronized
* 2 - - Active
Table 54-4: Output from show atmf backup synchronize logs
Node_1#show atmf backup synchronize logs
Id Log Details
--------------------------------------------------------------------------------
1 2016/09/30 22:25:54 [8039] receiving file list
2016/09/30 22:25:54 [8039] >f..t.... backup_Box1.info
2016/09/30 22:25:54 [8039] sent 46 bytes received 39 bytes total size 40
To Next Page
Loading...
Need help?
General
